Fixing Moisture In Your Compressed Air System

Moisture is one of the most common problems with compressed air systems. If left unchecked, moisture can cause your system to fail, costing you time and money. In this article, we’ll explain the factors that contribute to moisture build-up in a compressed air system, and provide tips on how you can fix it.

Causes of Moisture in a Compressed Air System

  1. Poor Compressor Operation: A poorly running compressor can cause moisture to form in the air system. This can be due to worn out or malfunctioning parts, or a problem with the compressor’s internal condenser fan. A poor compressor will also result in reduced air volume and pressure, which can also lead to moisture build-up.
  2. Lack of Venting: If the compressed air system does not have adequate ventilation, moisture will accumulate over time. This can occur if the system is installed in an enclosed area, or if the openings for ventilation are blocked. In extreme cases, this can lead to mildew and other types of mold growth.

Solutions to Fixing moisture in a Compressed Air System

Moisture is the number one issue with compressed air systems. It can cause equipment to malfunction, and it can also lead to costly repairs. Here are some solutions for fixing moisture in your compressed air system:

  1. Check the insulation on your system. Is it cracked or missing? This can let moisture into the system.
  2. Make sure the air compressor is operating correctly. If it’s not, you may be letting moisture into the system.
  3. Change out your filters regularly. Filters that are too dirty or worn out can allow moisture into the system.
  4. Check your traps and lines for blockages. If there are any, clean them up so that the water doesn’t accumulate and cause damage to your equipment.

How Does a Moisture Sensor Work?

A moisture sensor is a small electronic component that can detect the presence of water in an air system. When the sensor detects water, it sends a signal to the control unit that will turn off the compressor and open the discharge valve. This will prevent moisture from entering the system and causing damage.

There are several ways to install a moisture sensor. One option is to use a hole in the side of the compressor. Another option is to use a cable connector that can be mounted on the side or top of the water in compressed air lines. Ready to sell your air conditioner with FluidAiredynamics Company?

How to Fix Moisture Problems in an Air System

Most compressed air systems suffer from moisture problems. Moisture can cause your system to fail prematurely, costing you money in repairs. In this blog post, we will discuss how to fix moisture problems in an air system.

Step One: Inspect the Compressor

The first step is to inspect the compressor. If the compressor is not producing enough pressure or is generating excessive noise, it may be because of moisture problems. If this is the case, you will need to replace the compressor. However, if the compressor is still functioning correctly but is producing excessive moisture levels, there may be a solution available.\ n

Step Two: Check for Damaged Hoses and Tubes

If the compressor is generating excessive moisture levels, it is likely that damaged hoses and tubes are to blame. Hoses and tubes can become damaged due to exposure to extreme temperatures or by being crushed or pinched. If you notice any signs of damage, replace the hose or tube as soon as possible. Damage caused by moisture can also lead to leakage, which will further damage your system.

Related posts